Cool Automation CoolMaster 3000T Spécifications télécharger pdf (Page 47)

Powermonitor 3000 Master Module 47

Publication 1404-IN007F-EN-P - November 2009

The 1786-CP cable can be plugged into any ControlNet product’s NAP to provide

programming capability on the ControlNet network. A programming terminal connected

through this cable is counted as a node and must have a unique network address.

Interpret the Status Indicators

The power monitor is equipped with six bi-color status indicators.

The three status indicators on the left display the same information on power monitor

modules with any communication option including native RS-485 communication only. The

three status indicators on the right have different labels and different indications depending

on the communication option selected, as shown in these charts.

ATTENTION

Use a 1786-CP cable when connecting a programming terminal to the network through

NAPs. Using a commercially available RJ-style cable could result in network failure.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 63 64

Pas de commentaire

Cool Automation CoolMaster 3000T Spécifications Page 47